TENS 5000 Hybrid Analog and Digital by Current Solutions
TENS 5000 Hybrid Analog and Digital by Current Solutions

TENS 5000 Hybrid Analog and Digital by Current Solutions

On sale $33.99
Retail Price:$49.95
Your Savings:$15.96(32%)
In Stock
Part Number:koalaty-intensity5000
InTENSity 5000 HYBRID
Is it analog? Is it digital? It is both! This device combines the ease of traditional knobs with the beauty of LED technology to give the user the feedback they need to get the right therapy at the right time.
  • One unit for a full range of electrotherapy applications
  • 5 modes of TENS (Transcutaneous Electro-Nerve Stimulator) Unit Stimulation
  • 2 controllable output channels, each independent of each other
  • Comes with set of electrodes /wires/ ac adapter (plug-in) not included but available
  • Comes with 1 year manufacturers warranty

How Transcutaneous Electrical Nerve Stimulation works:
Transcutaneous Electrical Nerve Stimulation (TENS) is a non-invasive, drug free method of controlling pain. TENS Units use tiny electrical impulses sent through the skin to nerves to modify your pain perception. In most people it is effective in reducing or eliminating the pain, allowing for a return to normal activity. In many people, the reduction or elimination of pain lasts longer than the actual period of stimulation (sometimes as much as three to four times longer). In others, pain is modified while stimulation actually occurs. Unit overrides the pain signal to the brain by sending a comfortable electronic impulse. When the TENS Unit overrides the pain signal, it "tricks" the brain into thinking their is NO PAIN. This produces Fast and Rapid Pain Relief, usually within a minute or two. You can control and customize the intensity, pulse rate, and pulse width to "experiment" and find the best setting for your pain relief. Simply slide down the Key-press cover after adjusting the knobs have access to the Intensity output indicators.

 

Questions: Manufacturer 1-800-871-7858 or www.roscoemedical.com

Features:

The InTENSity 5000 combines the ease of traditional knobs with the beauty of LED technology to give the user the feedback they need to get the right therapy at the right time. The InTENSity™ 5000 Hybrid has 5 modes and a timer, comes in a nice hard case, electrodes, user manual, lead wires and 9-volt battery.

  • Channel:
    • Dual, isolated between channels
  • Wave Form:
    • Mono-phase square pulse wave
  • Pulse Amplitude:
    • Adjustable, 0 to 80 mA peak into 500 ohm load each channel
  • Pulse Rate:
    • Adjustable, from 2 to 150 Hz
    • Burst rate: 0.5 Hz (Burst mode)
  • Pulse Width:
    • Adjustable, from 30 to 260 microseconds
  • Output Voltage:
    • 0 to 40 V (Load: 500 ohm)
  • Burst:
    • Bursts occur twice every second. Pulse width (adjustable), pulse
      rate = 100 Hz, Burst rate = 0.5 Hz
  • Normal Mode:
    • The pulse rate and pulse width are adjustable. It generates continuous
      stimulation based on the setting value
  • Modulation 1 Mode:
    • Modulation 1 mode is a pulse width modulation. The pulse width is
      automatically varied in a cycle pattern over an interval of nominally 10
      seconds. Pulse width increase over a period of 5 seconds from 30 us
      to the control setting value, then decreases over a 5 second period
      to its original value.
  • Modulation 2 Mode:
    • Modulation 2 mode is a pulse rate modulation. The pulse rate is
      automatically varied in a cycle pattern over an interval of nominally 10
      seconds. Pulse rate decreases over a period of 5 seconds from the
      control setting value to a value which is 40% less, then increases over
      a 5 second period to its original value. They cycle is then repeated.
  • SD Mode:
    • The SD (Strength-Duration) mode consists of automatic modulation intensity
      and pulse width in 70% range. The intensity is always while the
      pulse width is decreasing and vice versa. The intensity is decreased
      by 70% while the pulse width is increased by 70% in 5 seconds. In
      the next 5 seconds, the intensity is increased by 70% while the pulse
      width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate
      (2~150Hz) and pulse width (30~260uS) are fully adjustable.
  • Timer:
    • 15, 30, 60 minutes or continue

Uses:

  • Relaxation of muscle spasms
  • Prevention of muscle retardation of disuse atrophy
  • Increasing local blood circulation
  • Muscle re-education
  • Immediate post-surgical stimulation
  • Maintaining or increasing range of motion

Package Includes:

  • Stimulator
  • Lead Wires (New FDA compliant)
  • 4 Self-stick Reusable Electrodes
  • Battery
  • Carrying Case
  • Instruction Booklet

Directions:

  • Clean the skin thoroughly
    • Proper skin care will help make your program more comfortable and trouble-free.
  • Check Battery
    • Be sure you are using a fresh battery.
  • Prepare Electrodes
    • Follow the instructions included in the electrode pads you choose
  • Connect The Electrodes to the Lead Wires
  • Place Electrodes on Skin
    • Apply the electrodes to the exact site indicated by your physician following the instruction included with the electrode system. Make sure that the electrodes are placed firmly to the skin making good contact between the skin and the electrodes.
  • Connect Lead Wires to the Output Sockets
    • The InTENSity 5000 Hybridt Unit is supplied with two twin lead wires. This device has two output receptacles controlled by Channel 1 and Channel 2 at the top of the unit. You may choose to use one channel with one pair of lead wires or both channels with two pairs of lead wires. Using both channels gives the user the advantage of stimulating two different areas at the same time..

Roscoe Medical
21973 Commerce Parkway
Strongsville, OH 44149
©Current Solutions www.roscoemedical.com

 

Related Items

Recently Viewed Items